I have read recommendations to use the "FLT_MIN" and "FLT_MAX" values for float. Whenever I do this, codeblocks tells me its

max: 3.40282e+038 min: 1.17549e-038

Not knowing what this meant I tried to get real values and got

max: 47.2498237715 min: -34.8045265148

... but these don't clarify things.

Here is a snippet from my code

 char c; // reserve: 1 byte, store 1 character (-128 to 127) int i; // reserve: 4 bytes, store -2147483648 to 2147483657 short int s; // reserve: 2 bytes, store -32768 to 32767 float f; // reserve: 4 bytes, store ?? - ?? (? digits) double d; // reserve: 8 bytes, store ?? - ?? (? digits) unsigned int u; //reserve: r bytes store 0 to 4294967295 c = 'c'; cout << c <<" lives at " << &c <<endl; i = 40000; cout << i <<" lives at " << &i <<endl; s = 100; cout << s <<" lives at " << &s <<endl; f = 10.1; cout << f <<" lives at " << &f <<endl; d = 10.102; cout << d <<" lives at " << &d <<endl; u = 1723; cout << u <<" lives at " << &u <<endl;

In the snippet we can clearly see the min-max values of a short int for example at -32768 - 32767. These are proper understandable values, but for float and int, the real values are not clear.

8

4 Answers

Alright. Using what I learned from here (thanks everyone) and the other parts of the web I wrote a neat little summary of the two just in case I run into another issue like this.

In C++ there are two ways to represent/store decimal values.

Floats and Doubles

A float can store values from:

• -340282346638528859811704183484516925440.0000000000000000 Float lowest
• 340282346638528859811704183484516925440.0000000000000000 Float max

A double can store values from:

• -179769313486231570814527423731704356798070567525844996598917476803157260780028538760589558632766878171540458953514382464234321326889464182768467546703537516986049910576551282076245490090389328944075868508455133942304583236903222948165808559332123348274797826204144723168738177180919299881250404026184124858368.0000000000000000 Double lowest

• 179769313486231570814527423731704356798070567525844996598917476803157260780028538760589558632766878171540458953514382464234321326889464182768467546703537516986049910576551282076245490090389328944075868508455133942304583236903222948165808559332123348274797826204144723168738177180919299881250404026184124858368.0000000000000000 Double max

Float's precision allows it to store a value of up to 9 digits (7 real digits, +2 from decimal to binary conversion)

Double, like the name suggests can store twice as much precision as a float. It can store up to 17 digits. (15 real digits, +2 from decimal to binary conversion)

e.g.

 float x = 1.426; double y = 8.739437;

Decimals & Math

Due to a float being able to carry 7 real decimals, and a double being able to carry 15 real decimals, to print them out when performing calculations a proper method must be used.

e.g

include

typedef std::numeric_limits<double> dbl;
cout.precision(dbl::max_digits10-2); // sets the precision to the *proper* amount of digits.
cout << dbl::max_digits10 <<endl; // prints 17.
double x = 12345678.312;
double a = 12345678.244;
// these calculations won't perform correctly be printed correctly without setting the precision.
cout << endl << x+a <<endl;

example 2:

typedef std::numeric_limits< float> flt;
cout.precision(flt::max_digits10-2);
cout << flt::max_digits10 <<endl;
float x = 54.122111;
float a = 11.323111;
cout << endl << x+a <<endl; /* without setting precison this outputs a different value, as well as making sure we're *limited* to 7 digits. If we were to enter another digit before the decimal point, the digits on the right would be one less, as there can only be 7. Doubles work in the same way */

Roughly how accurate is this description? Can it be used as a standard when confused?

2

The std::numerics_limits class in the <limits> header provides information about the characteristics of numeric types.

For a floating-point type T, here are the greatest and least values representable in the type, in various senses of “greatest” and “least.” I also include the values for the common IEEE 754 64-bit binary type, which is called double in this answer. These are in decreasing order:

• std::numeric_limits<T>::infinity() is the largest representable value, if T supports infinity. It is, of course, infinity. Whether the type T supports infinity is indicated by std::numeric_limits<T>::has_infinity.

• std::numeric_limits<T>::max() is the largest finite value. For double, this is 2¹⁰²⁴−2⁹⁷¹, approximately 1.79769•10³⁰⁸.

• std::numeric_limits<T>::min() is the smallest positive normal value. Floating-point formats often have an interval where the exponent cannot get any smaller, but the significand (fraction portion of the number) is allowed to get smaller until it reaches zero. This comes at the expense of precision but has some desirable mathematical-computing properties. min() is the point where this precision loss starts. For double, this is 2⁻¹⁰²², approximately 2.22507•10⁻³⁰⁸.

• std::numeric_limits<T>::denorm_min() is the smallest positive value. In types which have subnormal values, it is subnormal. Otherwise, it equals std::numeric_limits<T>::min(). For double, this is 2⁻¹⁰⁷⁴, approximately 4.94066•10⁻³²⁴.

• std::numeric_limits<T>::lowest() is the least finite value. It is usually a negative number large in magnitude. For double, this is −(2¹⁰²⁴−2⁹⁷¹), approximately −1.79769•10³⁰⁸.

• If std::numeric_limits<T>::has_infinity and std::numeric_limits<T>::is_signed are true, then -std::numeric_limits<T>::infinity() is the least value. It is, of course, negative infinity.

Another characteristic you may be interested in is:

• std::numeric_limits<T>::digits10 is the greatest number of decimal digits such that converting any decimal number with that many digits to T and then converting back to the same number of decimal digits will yield the original number. For double, this is 15.

1

It's all to be found in numeric_limits.

But BEWARE

For some reason unknown to me, std::numeric_limits<float>:min() does not return the minimum float. Instead it returns the smallest positive float that is represented in normalized form. To get the minimum, use std::numeric_limits<float>::lowest(). I kid you not. Likewise for other floating point types, i.e. double and long double.

0

In C++ you can use the std::numeric_limits class to get this sort of information.

If has_infinity is true (which it will for basically any platform nowadays), then you can use infinity to get the value which is greater than or equal to all other values (except NaNs). Its negation will give a negative infinity, and be less than or equal to all other values (except NaNs again).

If you want finite values, then you can use max, which will be greater than or equal to all other finite values, and lowest, which is less then or equal to all other finite values.

Somewhat confusingly, min actually gives you the smallest positive normalized value, which is completely out of sync with what it gives with integer types (thanks @JiveDadson for pointing this out).

6

Your Answer

Sign up or log in

Sign up using Google Sign up using Facebook Sign up using Email and Password Submit

Post as a guest

Post Your Answer Discard

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy